|
|
| |
Features of issue no. 1(1), 2012: |
| PDF |
Ramezani, O. and Rahmaninia, M. (2012).
"Lignocellulose – An online scientific
journal devoted to all issues related to lignocellulosic
materials," Lignocellulose
1(1), 1-2. |
|
PDF |
Jahan Latibari,
A., Ghasebin, H., Roohnia, M. and Karagarfard, A. (2012). "The
effect of fiber moisture and drying temperature on hardwood
fiber physical chemistry and strength of medium density
fiberboard,"
Lignocellulose 1(1), 3-12. |
|
PDF |
Abood, F., Izran,
K., Zaidon, A., Abdul Rashid, A. M., and Choong, W. S.
(2012). "Fire performance and technological properties of
medium density fiberboard made from rubberwood treated with
AG® PI,"
Lignocellulose 1(1), 13-21. |
|
PDF |
Mirskia, R.,
Dziurka, D., and Derkowskia, A. (2012). "Application of
chips designed for particleboard core in OSB as substitute
for flakes,"
Lignocellulose 1(1), 22-32. |
|
PDF |
Mhd Ramle, S. F., Sulaiman, O., Hashim, R., Arai, T.,
Kosugi, A., Abe, H., Murata, Y., and Mori, Y. (2012). “Characterization
of parenchyma and vascular bundle of oil palm trunk as
function of storage time,”
Lignocellulose
1(1), 33-44. |
|
PDF |
Xu, X. and Tang, Z. (2012). “Vertical
compression rate profile and dimensional stability of
surface-densified plantation poplar wood,”
Lignocellulose
1(1), 45-54. |
|
PDF |
Safdari, V. and Devall, M. S. (2012). “Identification
of important Iranian hardwoods by vessel-ray pits and vessel
element shapes (maceration process),”
Lignocellulose,
1(1), 55-70. |
|
PDF |
Resalati, H., Kermanian, H., Fadavi, F., and Feizmand, M.
(2012). "Effect
of hot-water and mild alkaline extraction on soda-AQ pulping
of wheat straw,"
Lignocellulose
1(1), 71-80. |
| |
|
| |
Features of issue no. 1(2), 2012:
|
|
PDF |
Latibari, A. J. (2012). “Non-wood
fibers and the 21st century,”
Lignocellulose
1(2), 81-82. |
|
PDF |
Soleimani, A., Resalati, H., and Akbarpour, I. (2012). “The effect of using
white birch on mechanical properties and fiber length
distribution of mixed hardwood CMP pulp,”
Lignocellulose
1(2), 83-91. |
|
PDF |
Xiong, D., Han, F., and Chen
M. (2012). “Effect
of styrene-acrylic emulsion on mechanical properties of
cement-based composites,”
Lignocellulose 1(2), 92-99. |
|
PDF |
Roohnia, M., Tajdini, A., Ghaznavi,
M. R., and Bayramzadeh, V. (2012). “Specific
dynamic shear modulus of drilled beech wood,”
Lignocellulose 1(2), 100-107. |
|
PDF |
Xu, Y., Cai, Y, Li, Z., and Zhou, Q. (2012). “The
influence of sticker thickness on hybrid drying of larix
gmelinii combined with radio-frequency and hot-air
heating,” Lignocellulose 1(2), 108-118. |
|
PDF |
Lashgari,
A. and Hosseini Hashemi,
S. k. (2012). “Analysis
of stress distribution and prediction of failures For
T-Shaped wood Screw joints using the finite Element method
(FEM),”
Lignocellulose
1(2),
119-128. |
|
PDF |
Singha,
A. S.,
Rana,
R. K.
and Guleria,
A. (2012). “Functional polymers from
graft copolymerization of binary monomer mixtures onto
lignocellulosic biomass: synthesis, characterization, and
properties evaluation,”
Lignocellulose
1(2),
129-152. |
|
PDF |
Fadavi,
F.,
Kermanian,
H.
and Resalati,
H. (2012). “Effect
of fiber fractionation on refinability and strength
properties of wheat straw soda-aq pulp,”
Lignocellulose
1(2),
153-163.
|
| |
|
| |
Features of issue no. 1(3), 2012: |
|
PDF |
Khosravani, A. and Rahmaninia, M.
(2012). “Paper
recycling, an old but still effective solution,”
Lignocellulose
1(3),
164-165. |
|
PDF |
Dashti, H., Tarmian, A., Faezipour, M. and
Shahverdi, M. (2012).
“Effect of
microwave radiation and pre-steaming treatments on the
conventional drying characteristics of Fir wood (Abies alba
l.),”
Lignocellulose
1(3),
166-173. |
|
PDF |
Sarı, B., Ayrilmis, N., Nemli,G., Baharoğlu, M, Gümüşkaya,
E. and Bardak, S. (2012). “Effects
of chemical composition of wood and resin type on properties
of particleboard,”
Lignocellulose
1(3),
166-184. |
|
PDF |
Jahan, M., S. Saeed, A.
and Ni, Y. (2012). “extraction of
cellulose microfibrils from non-wood lignocellulosic
material using biorefinery concept,”
lignocellulose 1(3), 185 – 195. |
|
PDF |
Bansal, N., Soni, R., Janveja, C. And Soni, S. K. (2012). “Production
of Xylanase-cellulase complex by Bacillus subtilis
NS7 for the biodegradation of agro-waste residues,”
Lignocellulose
1(3), 196–209. |
|
PDF |
Singh, P., Sulaiman, O.,
Hashim, R., Peng, L. C. and Singh, R. P. (2012). “Biodegradation
study of pycnoporus sanguineus and its effects on
structural and chemical features on oil palm biomass chips,”
Lignocellulose
1(3), 210–227. |
|
PDF |
Kajforush, S. and
Resalati, H. (2012). “The effect of
acid pretreatment and peroxide reinforcement in alkaline
extraction on optical and strength properties of
eucalpytus camaldulensis kraft pulp during ded bleaching
sequence,” Lignocellulose
1(3), 228– 240. |
|
PDF |
Chauhan,
V.
S.
and
Bhardwaj,
N.
K.
(2012).
“Effect
of
particle size
of
talc filler
on
structural
and
optical properties
of
paper,”
Lignocellulose
1(3), 241–259. |
|
|
|
|
|
Features of issue no. 2(1), 2013:
|
|
PDF |
|
|
PDF |
Gonultas,
O. and Balaban
Ucar,
M. (2013).
“Chemical
Characteristics of the
Cone and
Wood of
Pinus pinea,”
Lignocellulose
2(1),
262-268. |
|
PDF |
Kumar, A., Kumar Sharma, A., Kumar Jain, R. and Pal Singh,
B. (2013). “The
Use of Banana
(Musa sapientum)
and Ankara
(Calotropis procera)
in the Handmade Paper Industries,”
Lignocellulose
2(1), 269-281. |
|
PDF |
Rezanezhad, S., Nazanezhad, N. and Asadpur, G. (2013) “Isolation
of
Nanocellulose
from
Rice Waste
via
Ultrasonication,”
Lignocellulose
2(1), 282-291. |
|
PDF |
Riedl, B., Angel, C., Prégent, J., Blanchet, P. and
Stafford, L. (2013). “Wood
Surface Modification by Atmospheric-Pressure Plasma and
Effect on Waterborne Coating Adhesion,”
Lignocellulose
2(1), 292-306. |
|
PDF |
Ghorbani Kokandeh, M. (2013). “The
Effect
of
Acetylation
on
Heat
Transfer
Mechanism
During
Hot
Pressing
and
Mechanical
Properties
of
Wood
Based
Composites,” Lignocellulose 2(1), 307-315. |
|
PDF |
Varshoei, A., Javid, E., Rahmaninia, M. and Rahmany, F.
(2013). “The
Performance of Alkylketene Dimer (AKD) for the Internal
Sizing of Recycled OCC Pulp,”
Lignocellulose 2(1),
316-326. |
|
|
|
|
|
Features of issue no. 2(2), 2013:
|
|
PDF |
Mahajan, G. and Sud, D. (2013). “Lignocellulosic
Materials: The Cherry on the Cake of Biosorption,”
Lignocellulose 2(2),
327-328.
|
|
PDF |
Özdemir, F. and Tutuş, A.
(2013). “The
Effects
of
Some
Fire
Retardants
on
Physical
and
Mechanical
Properties
of HDF
Panels
Covered
with
Resin-impregnated
Paper,”
Lignocellulose 2(2), 329-337. |
|
PDF |
Eshaghi,
S., Taghiyari, H.
R., Faezipour, M.
(2013). “Comparison between Some
Factors Affecting Screw Withdrawal Resistance from Different
Wood-composite Panels,”
Lignocellulose 2(2), 338-350. |
|
PDF |
Ghofrani,
M., Farshchi, V. and Azizi, M. (2013). “Assessment and
Prioritizing Branding Factors Effective in the Furniture
Industry,” Lignocellulose 2(2), 351-362. |
|
PDF |
Kiaei, M. and Tajik, M.
(2013). “Identification
of Acetone Extractable Component from Iranian Elm (Ulmus
glabra huds) Wood,”
Lignocellulose
2(2), 363-368. |
|
PDF |
Sheikhi,
P., Ghobadifar, P. and Rezaei-Arjomand, F. (2013). “Investigation
on Characteristics of Bleached Bagasse Pulp Using Neutral
Sulfite and Soda Solutions,”
Lignocellulose
2(2), 369-376. |
|
PDF |
Vaysi, R. (2013).
“The Effects of Cooking and Bleaching on Organic Chemical
Compounds in CMP Pulp and Newsprint,”
Lignocellulose
2(2), 377-385. |
|
PDF |
Hubbe, M. A. (2013).
“New Horizons for Use of Cellulose-Based
Materials to Adsorb Pollutants from Aqueous Solutions,”
Lignocellulose 2(2), 386-411. |
|
|
|
|
|
Features of issue no. 3(1), 2014:
|
|
PDF |
Ramezani, O. (2014). “Change
from traditional curricula of Wood and Paper Science
Programs in Iran; a Necessity or a luxury?,”
Lignocellulose
3(1), 1-2. |
|
PDF |
Yazdani, O., Asadpour, G., Garmaroody, E. R. and Imani, R.
(2014).
“Effect of Cationic Polyacrylamide
and Antibacterial Nanosilver on Bank-note Paper Properties,”
Lignocellulose
3(1), 3-14. |
|
PDF |
Ghofrani, M., Baghery, H. and khojasteh Khosro, S. (2014). “Effect of Priming of
Wood Surface on the Adhesion Strength of Coating in
Furniture and Other Wooden Products,”
Lignocellulose
3(1), 15-21. |
|
PDF |
Bader, N.,
Souissi-Najar,
S.
and
Ouederni, A. (2014). “A
Controlled Nitric Acid Oxidation of an Olive Stones-based
Activated Carbon: Effect of Oxidation Time,”
Lignocellulose
3(1), 22-36. |
|
PDF |
Chander, M. and Arora, D.S. (2014).
“Biodegradation
of a Dye by Different White–rot Fungi on a Novel Agro
Residue Based Medium,”
Lignocellulose
3(1), 37-50. |
|
PDF |
Doelle, K., Le,
A. T.,
Bailey,
D.C.,
Zelie,
M.,
McNaney,
T.,
Salpeter,
D.M.,
Piazza,
J.,
Wainwright,
M.T.,
Klein,
R.J.,
Tramposch,
S.T.,
Dausman,
K.,
Elniski,
A.R.,
Guilford,
C.,
Murphy,
A.J.,
Rimmer,
T.J.,
Rozanski,
N.,
Streczywilk,
C.G.,
Walters,
S.P.
and Yan,
Y. (2014). “Laboratory
paper machine
evaluation of
poly-lactic
acid (pla)
on paper
properties of
unbleached recycled
fibers mixture,”
Lignocellulose
3(1),
51-58. |
|
PDF |
Pishan,
S.,
Ghofrani,
M.
and Kermanian,
H. (2014). “Study on Mechanical
Properties of Lightweight Panels Made of Honeycomb and
Polyurethane Cores,”
Lignocellulose
3(1),
59-68. |
|
PDF |
Hubbe,
M.A. (2014). “A
Review of Ways to Adjust Papermaking Wet-End Chemistry:
Manipulation of Cellulosic Colloidal Behavior,”
Lignocellulose
3(1),
69-107. |
|
|
|
|
|
Features of issue no. 3(2), 2014: |
|
PDF |
Mohammadkazemi, F. (2014). “Natural
Fiber-cement Composites in Comparison to Traditional
Construction Materials,”
Lignocellulose
3(2), 108-110. |
|
PDF |
Taghiyari,
H.R.,
Kalantari, A., and Ershad-Langroudi, A. (2014). “Effects
of Wollastonite Nanofibers on Biological Resistance of
Historical Paper against Aspergillus Niger,”
Lignocellulose
3(2),
111-118. |
|
PDF |
Boon, J.G., Hashim, R., Sulaiman, O., Nadhari, W.N.A.W.,
Lee, C.Y.,
Hiziroglu, S., Sugimoto, T., Sato, M., Ibrahim, M.H. (2014).
“The
Influence of Starch in Oil Palm Trunk Particleboard without
Synthetic Adhesive,”
Lignocellulose
3(2), 119-130. |
|
PDF |
Dixit,
S. and Nair, S. (2014). “A
Review on Delineating the Distribution of
p-Coumarate
vs. p-Hydroxybenzoate
as Acylating Groups in Lignin across Monocot Families,”
Lignocellulose
3(2), 131-144. |
|
PDF |
Banerjee, P.N. (2014). “Isolation
and Characterisation of Hemicelluloses Extracted by Steam
and Alkaline Peroxide at Different Temperatures from
Sugarcane Bagasse,”
Lignocellulose
3(2),
145-154. |
|
PDF |
Yang, Y., Jin, S.,
Duan, X.,
Huang,
S. and Yang, H. (2014). “Pyrolysis
of Tobacco Rob: Effect of Particle Size on Kinetic Study and
Fuel Gas Yield and Composition,”
Lignocellulose
3(2), 155-168. |
|
PDF |
Bagherzadeh Zeydi, F., Asadpour Atoii, Gh., Ramezani, O. and
Nazarnezhad, N. (2014). “Optimum Consumption Levels of
China Clay and GCC in Mixed NSSC/OCC Fluting Paper,”
Lignocellulose 3(2), 169-175. |
|
PDF |
Rudi,
H.,
Hamzeh,
Y.
And
Nazhad,
M. M.
(2014).
“Strength-enhancing
of Cationic Starch on Recycled Fibers via Layer-by-Layer
Self-assembly,”
Lignocellulose
3(2),
176-186.
|
|
|
|
|
|
Features of issue no. 4(1), 2015: |
|
PDF |
Taghiyari, H. R. (2015).
“Future Prospects of Wood Preservation with Nanotechnology,”
Lignocellulose 4(1), 1-3 |
|
PDF |
Dölle, K. , Schomann, C. and Amaya J. J. (2015).
“Hydrothermal Treatment of Sugar Maple (Acer saccharum)
Followed by Bleaching,”
Lignocellulose 4(1), 4-21. |
|
PDF |
Akbari, H., Ghasemi, A.S., Asadpour, Gh., Ashrafi, F. and
Babanejad, S.A. (2015).
“Utilization of Cationic Starch- Nano Silica Dual System to
Improve Zeta Potential, Retention, and Drainage of Mixed
NSSC - OCC Pulp,”
Lignocellulose 4(1), 22-30. |
|
PDF |
Manyuchi, M. M., Chiwanga, A. T. and Nkomo, D. J. (2015).
“Techno-Economic Analysis for Papermaking from Bagasse as a
Value Addition Strategy,”
Lignocellulose 4(1), 31-49. |
|
PDF |
Vaysi, R. and Tajik, M. (2015). “An Investigation on the
Physical, Chemical, and Biometrical Properties of Planted
Bamboo,” Lignocellulose 4(1), 50-57. |
|
|
|
|
|
Features of issue no. 4(2), 2015: |
|
PDF |
Mahajan, G. (2015). “Psychological Barriers Playing Key
Role in Impinging Research Excellence,”
Lignocellulose
4(2), 58-59. |
|
PDF |
Taghiyari, H. R. and Norton, J. (2015). “Fluid Flow in
Wood and Wood-composite Panels: Effects of Nanotechnology,”
Lignocellulose 4(2), 60-78. |
|
PDF |
Tajeddin, B., Rezaei, M. and
Mohammadi Sani, A. (2015). “The
Effect of Different Compatibilizing Agents on Thermal
Properties of Wheat Straw/Low Density Polyethylene
Biocomposites,”
Lignocellulose
4(2), 79-87. |
|
PDF |
Rudi,
H., Resalati,
H.,
and
Shekarbeigi, M. (2015).
“Helianthus
annus
Waste
Stalks,
as a
Substitute
Raw
Material
for
Mixed
Hardwood
Semi-chemical
Pulp,”
Lignocellulose
4(2), 88-99. |
|
PDF |
Torshizi, H. J. and
Latibari, A. J. (2015). “Application
of Dual Dry Strength Additives System on Brown Paper
Strength Development,”
Lignocellulose
4(2),
100-106. |
|
|
|
|
|
Features of issue no. 5(1), 2016: |
|
PDF |
Hosseinihashemi, S. K. (2016). “The
Feasibilty of Using Wood Extracts in Medicine,” 5(1),
1-2. |
|
PDF |
Tripathi, S., Sharma, N., Bhardwaj, N. K. and Varadhan, R.
(2016). “Improvement
in Kraft Pulp Yield and Strength Properties of Paper by
Black Liquor Pre-Treatment of Chips,”
Lignocellulose
5(1), 3-14. |
|
PDF |
Pal, A., Bhushan, B., Kumar, S. and Saharan, V. (2016). “Cost
Effective Fermentation, Purification,
and Operational Suitability of Xylanase from Aspergillus
Niger KR-3 Grown on Agricultural
By-Products,”
Lignocellulose
5(1), 15-33. |
|
PDF |
Sadiku,
N. A.,
Oluyege,
A. O.
and Sadiku,
I. B. (2016). “Analysis of the Calorific and Fuel Value
Index of Bamboo as a Source of Renewable Biomass Feedstock
for Energy Generation in Nigeria,”
Lignocellulose
5(1),
34-49. |
|
PDF |
Joshua, J. A., Ahiekpor, J. C. and Kuye, A.
(2016). “Nigerian Hardwood (Nesogordonia papaverifera)
Sawdust Characterization: Proximate Analysis, Cellulose and
Lignin Contents,”
Lignocellulose
5(1),
50-58. |
|
PDF |
Kiaei, M. (2016). “The
Relationship between Extractive Components and Density of
Persian Ironwood,”
Lignocellulose
5(1), 59-65. |
|
PDF |
Rudi, H., Kermanian, H., Resalati, H. and Teymori Rodi, L.
(2016). “The
Effect of Hot-Water Pre-Extraction on the Properties of
Soda-AQ Pulp of Wheat Straw,”
Lignocellulose
5(1), 66-76. |
|
PDF |
Hosseinihashemi, S. K., Aghajani, H., Anooshei, H. and
Roostaei, M. (2016). “Identification
of Wood and Bark Extractives in Indigenous Barberry (Berberis
vulgaris),”
Lignocellulose
5(1), 77-83. |
|
|
|
|
|
Features of issue no. 5(2), 2016: |
|
PDF |
Rudi, H. (2016).
"Quality Development of Recycled Fibers to Expand their
Papermaking Potential: Fractionation Approach,"
Lignocellulose
5(2), 84-85. |
|
PDF |
Manyuchi,
M. M.,
Tichapondwa, S. M. Ikhu-Omoregbe, D. I.O. and Oyekola, O.
O. (2016). “Process
Parameters Affecting the Production of Charcoal Briquettes
from Lignocellulose Waste,”
Lignocellulose
5(2), 86-93. |
|
PDF |
Vishwakarma, R. and Banerjee, R. (2016). “Enhancement
of Sugar Content
of
Cyperus
sp.
through Cellulolytic Enzymes
for Bioethanol Generation,”
Lignocellulose
5(2), 94-105. |
|
PDF |
Hooda, R., Bhardwaj, N. K. and Singh, P. (2016). “Decolorization of Pulp and Paper Mill
Effluent by Indigenous Bacterium Isolated from Sludge,”
Lignocellulose 5(2), 106-117.
|
|
PDF |
Pourmousa, S. (2016). “Effect
of Dispersion and Flotation Sequence on Optical and
Mechanical Properties of Deinked Computer Printout,”
Lignocellulose 5(2),
118-127.
|
|
PDF |
Manyuchi, M. M., Maramba, S. D. and Chaukura N. (2016). “Techno-economic
Assessment of Potential for Zinc Removal from Lake Water
using Maize Cornstover Activated Bio-charcoal,”
Lignocellulose 5(2), 128-138.
|
|
PDF |
Lemma, H. B., Kiflie, Z.,
Feleke S., and Yimam,
A. (2016). “Chemical and Morphological Analysis
of Enset (Ensete Ventricosum) Fiber, Leaf, and Pseudo stem,”
Lignocellulose 5(2), 139-151.
|
|
|
|
|
|
Features of issue no. 6(1), 2017: |
|
PDF |
Zhu, S., Luo, F., Huang, W., Cheng, B., Chen, J.
and Wu, Y. (2017). “Improvement
of Lignocellulosic Biorefinery via Lumped Kinetic Model and
Omics Analysis,”
Lignocellulose
6(1), 1-2.
|
|
PDF |
Nishida, H., Gomi, S. and
Ariffin, H. (2017). “Short Bamboo
Fibers Prepared
by Super-Heated Steam Treatment
for
Antistatic
Bio-composites,” Lignocellulose 6(1), 3-14.
|
|
PDF |
Nyakuma, B. B. (2017).
“Bioenergy Potential of Melon Seed Husks,”
Lignocellulose 6(1), 15-22.
|
|
PDF |
Kaur, P., Bhardwaj, N. K., Sharma, J. (2017). “Pentosan Reduction from Mixed Hardwood Kraft Pulp with Alkali Treatment
and Its Statistical Optimization,”
Lignocellulose 6(1), 23-35.
|
|
PDF |
Hosseinihashemi, S. K.
and Aghajani, H. (2017). “Chemical Composition and
Antioxidant Capacity of Extracts from the Wood of Berberis
vulgaris Stem,”
Lignocellulose 6(1), 36-47.
|
|
PDF |
Polášková, H. and Tesařová, D. (2017). “Evaluation
of the Antimicrobial Activity of Water-Borne and
Polyurethane Solvent-Borne Coating Materials for Wooden
Furniture According to Common and Newly Invented Testing
Methods,”
Lignocellulose 6(1), 48-58.
|
|
|
|
|
|
Features of issue no. 6(2), 2017: |
|
PDF |
Shidpour, R., Hubbe, M. A, and Hatam, A. (2017). “Fast-Growing
Attention to Lignocellulosic-based Biomaterials in the
Scientific Literature,” Lignocellulose 6(2), 59-61. |
|
PDF |
Atar, M., Gunes, M. and Keskin, H. (2017). “Impacts of the
Dovetail Tooth Angle on Diagonal Tensile Strength in
Leg-To-Rail Joints,” Lignocellulose 6(2), 62-73.
|
|
PDF |
Alipon, M.A., Alcachupas, P.L., Bondad, E.O., and Cortiguerra, E.C.
(2017). “Properties and Utilization of Acacia mangium
Willd. Timber at Different Ages and Sites in Caraga
Region, Philippines,” Lignocellulose 6(2), 74-87.
|
|
PDF |
Imoisili, P.E., Olusunle, S.O.O., Popoola, A.V.,
and Okoronkwo, A.E.
(2017). “Effect of Alkaline Treatment on the
Macromolecular, Thermal, and Crystallographic Structures of
Plantain (Musa paradisiaca) Fibers,”Lignocellulose 6(2),
88-97.
|
|
PDF |
Ahiekpor, J.C., Kuye, A.O. and Achaw, O.W. (2017). “Optimization
of the Pyrolysis of Hardwood Sawdust in a Fixed Bed Reactor
Using Surface Response Methodology,” Lignocellulose
6(2), 98-108.
|
|
PDF |
Obele, C.M., Ewulonu, C.M., and Ogbuagu, J.O. (2017). “Synthesis
and Characterization of Carboxymethyl Cellulose from Cassava
Stem (Manihot esculenta),” Lignocellulose 6(2),
109-118.
|
|
|
|
|
|
Features of issue no. 7(1), 2018
(currently in the process of building): |
|
|
|
|
|
|
|
|
